Select your language
2K Epoxy Primer
| Product | Description | Download pdf |
| Zinclax PA2 | 2K epoxy organic galvanizer with high content of pure metallic zinc, good anti-corrosive power. After sanding Sa 2-2,5, it is suitable to paint industrial structures that are subject to strong chemical attack, marine structures, tanks, protection of metallic structures in general. Application at temperature non lower than + 10 °C. Overcoating with epoxy or epoxyvinyl intermediates within the recommended time before final application of epoxy or epoxyvinyl or polyurethanic etc. top coats. |
   |
| Epovin UV | Intermediate epoxy polyamide primer with vinylic modification. In anticorrosion, as an intermediate coat that is applied on suitable primers before topcoat. As adhesion primer on iron or on zinc plated (with Q 120N) sheet with illimitated coatings after treatment with mechanical devices or sanding. It can be applied at high thickness. Application at temperatures not lower than + 5/10 °C. Overcoat after 2/4 huors with epoxy or polyurethanic acrylic enamels. |
|
| Eurepox PAM | Intermediate epoxy polyamide primer, high thickness of layers (200 micron each layer), good adhesion. Application at temperatures not lower than + 5/10 °C. after treatment of the structure with mechanical devices or sanding on iron and on zinc plated sheets. Overcoat after 1 huor with epoxy, polyurethane or acrylic enamels. |
|
| Eurepox PA | Two-component modified epoxy-polyamide primer based on inert pigments. High thickness layer. Excellent adhesion on metallic surfaces after suitable pre-treatment. Excellent resistance to hydraulic oils (use Q 107). |
|
| Epozinc PZ | Two-component epoxy-polyammide anticorrosive primer. Good anti-corrosive power. Good adhesion on treated zinc plated sheets (use Q120N), iron after treatment with mechanical devices or sanding. It is also suitable as intermediate layer in anticorrosive cycles for iron structures. Apply at temperatures not lower than +10 °C. Overcoating within 24/48h with epoxy or polyurethane enamels. |
|
| Epozinc PZM | Two-component epoxy-polyammide anticorrosive primer. Good anti-corrosive power. Good adhesion on treated zinc plated sheets (use Q120), iron after treatment with mechanical devices or sanding. It is also suitable as intermediate layer in anticorrosive cycles for iron structures. Apply at temperatures not lower than +10 °C. Overcoating within 24/48h with epoxy or polyurethane enamels. |
|
| Epocar white VEPO 82 | Anticorrosive epoxy-polyammide primers. Excellent anti corrosive power. Excellent adhesion, application (from + 10°C.) on: iron, zinc plated sheet and light alloys (with Q 120N) after treatment with mechanic devices or sanding. Overcoating within 24/48h with epoxy, polyurethane or acrylic enamels. |
|
Autopromotec 2025
